self sorting nodes in d3 fdg III

Force Directed Graph with self sorting nodes

The nodes arrange themselves by size, with the larger nodes migrating toward the center.

Features

Metrics display and inputs
The metrics panel across the top of the svg element gives a live display of the layout state. The inputs on the left allow for the number of nodes and the force gravity and the friction to be adjusted live. The current alpha value for the layout is displayed along with instantaneous and averaged tick time and the average calculation rate of the layout. Changing any of the inputs re-starts the layout.
Accelerated annealing
The annealing calc is done every tick but, until alpha drops below 0.05, the viz is only updated every nth tick (n is currently 4). This delivers significant reductions in the time to reach equilibrium (roughly a factor of 2).
Force dynamics
The force dynamics are a function of alpha, with two phases. The initial phase has zero charge, low gravity and low damping. This is designed to maximise mixing and sorting. The second phase has a higher gravity and a large, negative charge and much higher damping, this is designed to clean up and stabilise the presentation of the nodes.
Collisions between nodes
Based on this example but enhanced to sort the radial position of the nodes based on size, with larger nodes closer to the center. Every collision is used as an opportunity to correct the relative positions. If they are out of position then the radial ordinates of the colliding nodes (in polar coordinates) are swapped. The sorting efficiency is therefore reliant on good mixing in the collisions. In order to maximise the mixing, the nodes are all created at the same point in the center of the graph. When the nodes are swapped, the velocity of the bigger node is preserved while the smaller node is accelerated. Thus, the sorting efficiency is enhanced because the smaller nodes are flung out from the collision point. The mass is calculated assuming the nodes are spheres, using r³, and the rebounds calculated according to relative "mass".

d3 features used

<!DOCTYPE html>
<meta charset="utf-8">
<style>
    body {
        /*margin: 200px 500px 100px 500px;*/
        /*font-size: 10px;*/
    }
    #inputs {
        display: inline-block;
        margin: 0 0 0 0.5em;
    }

#panel {
        display: inline-block;
        margin: 0 0 0 100px;
        border: none;
        box-sizing: border-box;
        background-color: black;
    }

#metrics {
        display: inline-block;
    }

label, input {
        /*font-size: 10px;*/
        text-align: left;
        width: 3.5em;
        color: orange;
        /*padding-left: 1em;*/
        background-color: black;
        outline: none;
        border: none;
    }

circle {
        stroke: black;
        /*stroke: #ccc;*/
        /*stroke-opacity: 0.5;*/
        /*stroke-width: 6;*/
    }

svg {
        display: block;
        overflow: visible;
        border: none;
        background: black;
        margin: 0 100px 0 100px;
    }

text {
        text-anchor: middle;
    }

rect {
        stroke: #ccc;
    }

</style>
<body>
<script src="https://cdnjs.cloudflare.com/ajax/libs/d3/3.5.5/d3.min.js"></script>

<script
    src="https://cdnjs.cloudflare.com/ajax/libs/tinycolor/1.1.2/tinycolor.min.js"></script>
<script src="https://cdn.jsdelivr.net/gh/repo/cool-blue/d3-lib/filters/shadow.js"></script>
<script
    src="https://gitcdn.xyz/repo/cool-Blue/d3-lib/master/elapsedTime/elapsed-time-2.0.js"></script>
<script>
    !(function() {
        var inputs    = d3.select("body").append("div")
                .attr("id", "metrics")
                .append("div").attr({id: "panel"})
                .append("div").attr({id: "inputs"}),
            nodeCount = inputs.append("label")
                .attr("for", "nodeCount")
                .text("nodes: ")
                .append("input")
                .attr({
                    id       : "nodeCount",
                    class    : "numIn",
                    type     : "number",
                    min      : "100",
                    max      : "5,000",
                    step     : "100",
                    inputmode: "numeric"
                });

var elapsedTime = outputs.ElapsedTime("#panel", {
                border : 0, margin: 0, "box-sizing": "border-box",
                padding: "0 0 0 3px", background: "black", "color": "orange"
            })
                .message(function(value) {
                    var this_lap = this.lap().lastLap, aveLap = this.aveLap(this_lap)
                    return 'q:' + d3.format(" >4,.0f")(force.charge())
                        + '\talpha:' + d3.format(" >7,.3f")(value)
                        + '\ttick time:' + d3.format(" >8,.4f")(this_lap)
                        + ' (' + d3.format(" >4,.3f")(this.aveLap(this_lap)) + ')'
                        + '\tframe rate:' + d3.format(" >5,.1f")(1 / aveLap) + " fps"
                        + '\ttime:' + d3.format(" >4,.1f")(this.t()) + " sec"
                }),

width       = 960 - 200,
            height      = 500 - elapsedTime.selection.node().clientHeight,
            padding     = 0, // separation between nodes
            maxRadius   = 5;

elapsedTime.consoleOn = false;

var n0 = 500,
            m  = 1,
            c  = 10,
            g  = 0.01, g2 = 0.05,
            f1 = 0.5, f2 = 0.001,
            q2 = -2000;

var x = d3.scale.linear()
                .domain([-width / 2, width / 2])
                .range([0, width]),
            y = d3.scale.linear()
                .domain([-height / 2, height / 2])
                .range([height, 0]);

tick.reset = function() {
                    stage1 = true;
                };
                return tick;
            })(),
            force = d3.layout.force()
                .size([width, height])
                .gravity(g)
                .charge(0)
                .friction(f1)
                .on("tick", tick)
                .on("start", function() {
                    elapsedTime.start(1000);
                    tick.reset();
                    console.log("force start")
                });

var svg    = d3.select("body").append("svg")
                .attr("width", width)
                .attr("height", height)
                .append("g"),
            bubble = Bubble(svg);

nodeCount
            .property("value", n0)
            .on("change", function() {
                viz = update(force, this.value, padding);
                this.blur();
            });

elapsedTime.selection.style({
            width: (width
            - parseFloat(window.getComputedStyle(d3.select("#inputs").node()).getPropertyValue("width"))
            - parseFloat(window.getComputedStyle(d3.select("#inputs").node()).getPropertyValue("margin-left")))
            + "px"
        });

var viz = update(force, n0, padding);

// if the nodes are in the wrong radial order for there size, swap radius ordinate
                                var rel = m / mq, bigger = rel > 1,
                                    rad = d.r / quad.point.r, farther = rad > 1;
                                if(bigger && farther || !bigger && !farther) {
                                    var d_r = d.r;
                                    d.r = quad.point.r;
                                    quad.point.r = d_r;
                                    d_r = d.pr;
                                    d.pr = quad.point.pr;
                                    quad.point.pr = d_r;
                                }
                                // move nodes apart but preserve the velocity of the biggest one
                                // and accelerate the smaller one
                                d.x += (x *= l);
                                d.y += (y *= l);
                                d.px += x * bigger || -alpha;
                                d.py += y * bigger || -alpha;
                                quad.point.x -= x;
                                quad.point.y -= y;
                                quad.point.px -= x * !bigger || -alpha;
                                quad.point.py -= y * !bigger || -alpha;
                            }
                        }
                        return !possible;
                    });
                };
            }
        }

get pr() {
                        var xx = x.invert(this.px), yy = y.invert(this.py);
                        return Math.sqrt(xx * xx + yy * yy);
                    },
                    get ptheta() {
                        var xx = x.invert(this.px), yy = y.invert(this.py);
                        return Math.atan2(yy, xx)
                    },
                    set pr(_) {
                        var theta = this.ptheta;
                        return [this.px = x(_ * Math.cos(theta)), this.py = y(_
                            * Math.sin(theta))]
                    },
                    set ptheta(_) {
                        var r = this.pr;
                        return [this.px = x(r * Math.cos(_)), this.py = y(r
                            * Math.sin(_))]
                    },
                };
            }))
                .gravity(custom.g || Math.pow(n0 / n, 1.2) * g)
                .friction(custom.f || f1)
                .charge(0);
//            window.setTimeout(function(){
                force.start()
//            }, 20)

return Collide(force.nodes(), padding);
        }

function update(force, n, padding, custom) {
            elapsedTime.start(1000);

return {
                collide: initNodes(force, n, padding, custom || {}),
                circle : (function() {
                    var update = svg.selectAll("circle")
                        .data(force.nodes());
                    update.enter().append("circle");
                    update.exit().remove();
                    update.attr("r", function(d) {
                        return d.radius;
                    })
                        .call(bubble.call)
                        .call(force.drag);
                    return update;
                })()
            };
        }

Updated missing url https://gitcdn.xyz/repo/cool-Blue/d3-lib/master/filters/shadow.js to https://cdn.jsdelivr.net/gh/repo/cool-blue/d3-lib/filters/shadow.js

https://cdnjs.cloudflare.com/ajax/libs/d3/3.5.5/d3.min.js

https://gitcdn.xyz/repo/cool-Blue/d3-lib/master/filters/shadow.js